14mm (0.56 inch) red single digit common cathode 7 segment display
Application:
• Home and smart appliances
• Display time and digital combination
• Industrial and instrumental applications
• Numeric status
Selection guide:
| Part number | Emitting color (Material) | Lens type | Iv (ucd) @ 10mA | Description |
| Min. | Typ. |
| CPS05613AR | Hyper red (AlGalnP) | White diffused | 31000 | 97000 | Common cathode, Rt. Hand Decimal |
| *14000 | *27000 |
Electrical / Optical characteristics at TA=25℃
| Parameter | Symbol | Emitting color | Value | Unit |
| Typ. | Max. |
| Wavelength at peak emission IF=10mA | λpeak | Hyper Red | 645 | - | nm |
| Dominant wavelength IF=10mA | λdom | Hyper Red | 630 | - | nm |
| Spectral bandwidth at 50% Φ REL MAX IF=10mA | Δλ | Hyper Red | 28 | - | nm |
| Capacitance | C | Hyper Red | 35 | - | pF |
| Forward voltage IF=10mA | VF | Hyper Red | 1.85 | 2.35 | V |
| Reverse current (VR=5V) | IR | Hyper Red | - | 10 | μA |
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
Absolute maximum ratings at TA=25℃
| Parameter | Symbol | Value | Unit |
| Power dissipation | PD | 75 | mW |
| Reverse voltage | VR | 5 | V |
| Junction temperature | Tj | 115 | ℃ |
| Operating temperature | Top | -40 to +85 | ℃ |
| Storage temperature | Tstg | -40 to +85 | ℃ |
| DC forward current | IF | 30 | mA |
| Peak forward current | IFM | 185 | mA |
| Electrostatic discharge threshold(HBM) | - | 3000 | V |
| Lead solder temperature | 260℃ for 3-5 seconds |
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
Dimension: (mm)
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01") unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
Technical data:
Recommended wave soldering profile:
Notes:
1. Recommend pre-heat temperature of 105℃ or less (as measured with a thermocouple attached to the LED pins) prior to immersion in the solder wave with a maximum solder bath temperature of 260℃
2. Peak wave soldering temperature between 245℃ ~ 255℃ for 3 sec (5 sec max).
3. Do not apply stress to the epoxy resin while the temperature is above 85℃.
4. Fixtures should not incur stress on the component when mounting and during soldering process.
5. SAC 305 solder alloy is recommended.
6. No more than one wave soldering pass.
7. During wave soldering, the PCB top-surface temperature should be kept below 105℃.
Product Tags:
|
|
5V Reverse Voltage 7 Segment Numeric Display 0.56 Inch For Smart Appliances Images
|
